Links Close

Pad printer machine scraping ink is not clean, problem resolve

Filename Pad printer machine scraping ink is not clean, , problem resolve.docx
File Size 44.6KB
Revision Date 2020/08/26

Pad printer machine scraping ink is not clean, problem resolve

 The possible causes of the unclean scraping of ink are organized as follows

The structure of the ink cup  is


A: Ink cup  main components are

  • Ink cup plastic body :

    • ong time immersion in corrosive solvents may  cause the body to expand deformat , which will adversely affect  the shape of the blade ring and result in dirty ink scraping 

  • Packing O-ring :

    • ong time immersion in corrosive ink, will  cause the Packing deterioration, , deformation, , reduce the service life. When finish work it is recommended to clean the ink cup  everyday

  • Blade ring :

If the blade is hit , which may cause the blade to damaged , you can use the back of the nail to touch it in a circle to check whether it is missing.

Note: Using improper inks , or additives , some inks will contain powder particles that are too large and too hard, which will affect the life of the blade ring .

In normal use, blade ring`s life can scrape ink at least 2 million times .

Note : Do not use empty ink cup  or a small amount of ink to be scratch , it will cause serious damage to the blade ring.


B: Cliché

  • The flatness of themust be within 0.03mm

  • When the Cliché is  scraped , the same scraping position must be maintained . If  Cliché is scrapes  10000 times on machine A  then scrapes ink 10000 times on  the  machine B ,  it is  easy to leak ink due to different scraping tracks 

  • Generally the Cliché with hardness above  62 degrees can  scrape ink 200,000 times continuously , but  Cliché with insufficient hardness will quickyly cause  ink leakage

  • Too many times of repeated grinding and remaking of the Cliché, surface decreases , and the times of scratch resistance will also be reduced

  • The pattern of single time ink staining must be consistent with the etching pattern of the Cliché .The pattern that do not allow the rubber pad to be inked every time , the ink is scraped are easily squeezed by the scraper to push ink to the outer ring , causing ink leakage

C: Ink cup cover

There have strong magent installed at the bottom of the ink cup cover ,  and the high temperature will cause the magnetic field  to disappear or decrease , which will affect  the  ink cup cover is not fit enough and leak ink .


D: Ink Cup holder

  • Ink cup holder should be horizontallock,  unless external forces are not easy to damage

  • At least 2mm when the holder bracket is pressed under the ink cup cover 



The above is only a partial preview, please download the file if you need the complete content, please click the Download button to download.