Videos

Adjust the upper position of the screen holder. The major concern is for the convenience to put  and retrieve the substrate. 

FA-400 RSN  Semi automatic curved screen printer tutorial video Part-3

Curved screen printer tutorial video Part 3

1.Adjust ink scraping area. 

• Make screen's travel adjustment based on the graphic on the screen stencil. Adjustments are made through Human-Machine interface. 

  • Push 【Positioning Moving Left】button. Push 【Inching- Left】 button until ink scraping area covers the logo. Push 【Left Positioning Point Input】 button and have PLC keep a record of the squeegee position.

  • Push【Positioning Moving Right】button then push 【Inching- Right】button until ink blade goes back to the position where ink can cover the complete graphic. When ink scraping position is confirmed, push 【Right Positioning Point Input】button and make sure the start points of the squeegee and ink blade are correct. 

 2.Adjust the position of screen holder.

• Adjust the upper position of the screen holder. The major concern is for the convenience to put  and retrieve the substrate. 

※It leads to a longer operation time if the screen holder is too high. Substrates are difficult to put and retrieve if it is too low.

3. Printing 

• Apply a tape on the substrate for test printing if needed. 

• Pour properly prepared ink on the screen stencil.  

• Start test printing. Push【SEMI AUTO】button to print.

• Make subtle adjustments based on test printing result until ideal printing image is reached.