Reference

Links Close

How to Select Pad-Print and Screen-Print

Filename How to Select Pad-Print and Screen-Print-EN.pdf
File Size 161.8KB
Revision Date 2020/10/13
Download

How to Select Pad-Print and Screen-Print

Project Pad Printing-Characteristics Pcreen Printing-Characteristics
Material of Printed Object Plastic, Metal, Ceramic, Glass, Rubber, Paper, Cloth and etc. Plastic, Metal, Ceramic, Glass, Rubber, Paper, Cloth and etc.
Shape of Printed Object  Plane, Concave, Convex, Curved, Irregular Surface,Texture Surface Plane, Curved Shape (Cylinder, Cone)
Printed Pattern
  • Normally, the printed pattern for pad-print is not big.( Within 80mm D.)

  • Bigger pattern is printable. But the cost is higher.

  • For small/thin pattern, pad-print is more suitable than screen-print.

  • It has relatively less restriction for screen-print. 100-200 cm pattern is printable.

  • Screen print is suitable for bigger printed pattern.   

Pattern Thickness Thinner. The thickness of the printed pattern is less than 0.01mm  Thicker. The thickness can be controlled by screen’s thickness and hardness of the squeegee.
Other Characteristics
  • The ink used for pad-print dries faster and is specially suitable for multicolor printing.

  • Ink-cup print is applicable which seals the ink to keep it clean. It is stable and environmental friendly.    

  • It has relatively less restriction for the ink used on screen-print. BesidesSolvent-Evaporation ink, the liquid materialsuch as UV ink, superglue are all applicable.

  • The cost of making the screen plate is cheaper than making the steel plate if theprinted pattern is the same.

 

 

 

 

The above is only a partial preview, please download the file if you need the complete content, please click the Download button to download.