finecause.comIntroduction of Different Solvents_The Relationship between Solvents and Printing_Services & Support Pad Printing Machine, Pad Printing Equipment ,Screen Printing Machine, Screen Printing Equipment | finecause.com

Services & Support

The Relationship between Solvents and Printing

Home > Services & Supports > Printing Technology Exchange > The Relationship between Solvents and Printing > Introduction of Different Solvents
Introduction of Different Solvents
Introduction of Different Solvents

Cleanup Solution

Used to clean screen/steel plate

Ink Cleaner
Used to clean up the printing defects. When wiping the products, it’s not damaging the surface of ABS, PC or Acrylic.
Extra Fast Evaporating Solvent It is used to make the pad-print ink thinner. And accelerate the evaporating of the ink to enhance deinking effect.
Fast Evaporating Solvent
Suitable for ink-plate pad-printer with the steel plate depth at 20-28u OR ink-cup pad-printer with the steel plate depth at 18-25u.
Standard Solvent
Suitable for ink-plate pad-printer with the steel plate depth at 15-22u.
Slow Evaporating Solvent
Suitable for general screen-print OR pad-printer with steel plate depth at 15u.
Extra Slow Evaporating Solvent
Suitable for screen-print because the ink dries fast or the printed line is too thin that causes the screen stuffed-up.

Condensing Agent
HM(Imported)/
Taiwan Brand

Used on screen printing to prevent ink diffusion. Adding 10~20% the condensing agent into ink can slow down the evaporating of the ink. It can reduce ink viscosity to prevent the ink flow in order to increase resolution of the printed pattern. Normally, it’s used for small design, line or the printed object with rough surface. It is also suitable for pad-print. The only concern is that it may reduce the concentration of the ink color and loss of the surface smoothness if it is used in excess.
ST1 Extender Base Suitable for both pad and screen printing. It is used to reduce the viscosity of the ink. It is recommended to add it at about 10%.
VM1 Flow Agent
Suitable for both pad and screen printing. The flow agent can increase the flow of the ink. It can also eliminate the problem of the ink causing bubbles or pinpoints on the printing surface to make the surface smooth and pretty. Adding the flow agent no more than 5% to prevent the printed pattern diffusion.

 

Back